How To Craft Your Own Wooden Standee

The trend of wooden standees has been rising the past few years, especially during the holidays and winter. But what makes a good standee is less about how it looks than it is about its potential for holding gifts ornaments – are all that carved to perfection, will there be enough space in the standee for your presents, etc.? Here’s how to create your own solid standee with custom features and software to personalize it.

Basics of Standees and What can be done with them

Creating a wood standee is a fun and easy way to get your message out there. The basic steps are:

  1. Purchase a piece of wood at a local craft store or online.
  2. Draw or create the design you want on the wood using a pencil, pen, or paint.
  3. Cut out the design using a saw or a jigsaw.
  4. Sand the edges of the cut-out down if desired.
  5. Polish the wood if desired.
  6. Attach fabric or insulation to the back of the standee using hot glue or thread, then hang it up where people will see it!

Types of Standees

There are a few different ways to make your own wooden standee, and each involves a slightly different process. One option is to use a template to make your standee exactly the way you want it, then just buy the materials necessary to complete the project. Alternatively, you can create your own standee by cutting out a piece of wood that’s the appropriate size, then painting or decoupling it according to your desired look and finish. Either way, be sure to follow the specific instructions provided for whichever method you choose in order to create a sturdy, reliable standee that will look great on display!

Materials to Use

When you’re ready to create your very own wooden standee, there are a few materials you will need. The most important part of this project is the wood itself – select a sturdy and lightweight board that can be easily carved.

Once you have your wood selected, you will also need some supplies for finishing and assembly: wood glue, a Wood Chisels or Hatchets, Sandpaper (220-grit or higher), Paint or Acrylic Sealant, and Stabilizer.

To begin the project, lightly sand the entire surface of the wood with 220 grit sandpaper to prepare it for painting or sealant. Apply a thin layer of glue to one side of the board and place the carved image onto it. Use clamps to hold it in place while the glue dries. Allow time for drying before sanding down any excess glue.

Where to Get Wooden Standees

If you’re looking for a creative way to spruce up your desk without spending a fortune, wooden standees are a great option. They’re easy to make and look great in any room. Here are four tips on how to create your own:

  1. Choose the Right Wood
    The first thing you’ll need to do is choose the right wood for your standee. The wood should have a smooth surface so that it will be easy to paint or etch onto. Make sure the wood is dry before starting your project.
  2. Plan Your Design
    Once you have chosen the wood, you’ll need to plan your design. Think about what message or image you want to communicate with your standee. You can use shapes, colors, or both to create a unique piece of artwork.
  3. Cut and Saw the Wood Pieces
    Next, cut the pieces of wood that you will need for your standee using a saw or a jigsaw. Be sure to measure carefully before cutting so that everything looks consistent when assembled. Glue and screw the pieces together as needed, following the instructions that came with your saw (orWoodworking tools).
  4. Paint or Etch Your Standee
    Now it’s time to paint or etch your standee! Using an acid-free paint or spray sealant, cover the entire surface of your standee with whatever design you’ve chosen. Be sure to allow enough

Printing and Decorating Wooden Standees

Welcome to our guide on how to create your very own wood standee. While standees are often seen as promotional or temporary accents, there is a lot you can do with a little woodworking and some creativity!

The first step is to gather what you will need for your project: clamps, Jigsaw, Drill, Saw Horses/saw blade extension cord, Wood Glue, and Paint. After deciding on the size of your final standee (most of these tutorials provide patterns that can be scaled up or down), measure out the desired dimensions for each piece of wood. Next, cut out the shape using your jigsaw. Make sure all cuts are even and square- If not, you may end up with crooked pieces that won’t fit together well once glued together (trust us – we’ve been there). Once all pieces are cut out, it’s time to get organized! Paint each piece of wood a different color so you can easily identify them later on when assembling the standee. Finally, mix together your Wood Glue and Paint consistency until you have a nice smooth finish. Apply the glue to one side of each piece of wood and press them together until they adhere. Then use your saw horses or saw blade extension cord to make sure they stay in place while the glue dries (this process will take approximately two hours). Once finished, your wooden standee is ready for display!

Your Print on Wood Picks

If you’re looking for a unique, personalized gift, why not make your own wooden standee with vograce? This is a great project for the crafty DIYer and is simple to execute. All you need are some wood picks and a printer!

To create your wooden standee, first print out the template that you can find online or download it from the link below. Cut out the template with a jigsaw or other sharp cutting device and then use wood picks to adhere it to a piece of wood. Be sure to drill holes in the pick end of each stick so that they can be attached to the wood surface with screws or nails.

Once your wooden standee is complete, enjoy displaying it at your next party or event!


Leave A Reply

Your email address will not be published. Required fields are marked *